Tampa's Trusted Fence Installation Company

Yes. The City of Tampa requires a building permit for new fence installation in all residential zones. Applications go through the Construction Services Center at 1400 N. Boulevard, and most residential fence permits are issued within 7 to 14 business days. We pull the permit on every Tampa install so you don't have to navigate the city portal yourself.

The City of Tampa sets fence permit fees based on linear footage and project value. For most residential fence installs the permit runs a small share of total project cost. We include the permit fee in every written estimate, pull it on your behalf, and submit the site plan to the Construction Services Center on 1400 N. Boulevard.

Tampa sits inside the Florida Building Code Wind-Borne Debris Region with design wind speeds of roughly 130 to 140 mph depending on exposure category. That changes how a fence has to be anchored, not just what it looks like.

On Davis Islands, Bayshore Boulevard, and other waterfront-facing Tampa neighborhoods, we set posts deeper and use larger concrete footings than a comparable inland install would require. Aluminum and vinyl with through-bolted brackets ride out storms better than nailed wood panels.

Tampa zoning generally allows fences up to 6 feet in residential side and rear yards, and 4 feet in front yards. Corner lots have additional visibility-triangle setbacks at the intersection. Historic overlay districts like Hyde Park and Ybor City carry tighter restrictions on style and material in addition to the height limits. We confirm your specific allowance with the city's planning division before drawing up your install.

Yes. Westchase, Tampa Palms, New Tampa, and Avila all enforce specific approved materials and colors through architectural review boards. Most approve white or tan vinyl in 6-foot privacy and black aluminum view fencing; few permit chain-link in front-facing yards. Hyde Park's historic district adds an additional approval layer through the city's Historic Preservation office.

Bring your HOA architectural review form to the estimate and we'll spec a fence that gets approved on the first submission.

Yes. Florida's Residential Swimming Pool Safety Act requires a barrier at least 4 feet tall around any residential pool, with self-closing, self-latching gates that open outward from the pool. The City of Tampa enforces these rules alongside Hillsborough County, and they apply whether the pool is in-ground or above-ground.

Most Tampa homeowners choose black powder-coated aluminum because it meets the code, holds up in humid air, and doesn't block the backyard sightline.

After permit issuance, most residential installs take 2 to 4 days depending on linear footage, terrain, and material. Older neighborhoods with mature live-oak canopy, like Hyde Park and Seminole Heights, can take an extra day when post holes hit established root systems. Davis Islands and other waterfront properties also add time when post anchors need saltwater rating.

We schedule around weather and notify Sunshine 811 for utility locates before any post hole goes in.

The City of Tampa requires a survey or site plan with the permit application showing the fence location relative to property lines and setbacks. If you don't have a recent survey, the city can sometimes pull older ones on file, or we can recommend a local surveyor. We always confirm property boundaries before setting any post because that's where most neighbor disputes start.

Yes. Hyde Park, Ybor City, Tampa Heights, and Seminole Heights all sit inside historic overlay districts. Fence installs in these neighborhoods require an additional Certificate of Appropriateness through the city's Historic Preservation office on top of the standard building permit. The review typically restricts material and style to options that match the era of the surrounding architecture, which usually means wood picket, board-on-board, or shadowbox rather than vinyl. We handle the Historic Preservation submission as part of every install in these districts.